Page 1 of 1
CP 200 Programing
Posted: Fri Jan 23, 2009 2:36 pm
by ASWEEZY1
Hi I am fairly new at this I was asked to program 4 CP 200 4 channel portables (model number AAH50KDC9AA1AN ) I am using Motorola Commercial Series CPS 05.05. I am using a Ribless cable and USB adaptor. When i try to read these radios i get this
i understand there is a way to crack the region error using WINHEX i opened cps.exe in WINHEX and was lost.................
Any help would be great
Re: CP 200 Programing
Posted: Fri Jan 23, 2009 5:36 pm
by MetroMan
Not sure if it's related to the error but the latest software version is 05.07
Rich
Re: CP 200 Programing
Posted: Fri Jan 23, 2009 7:15 pm
by HLA
what region or rev # is on the cps disc? and try using a different machine with a real serial port and not using the usb adaptor
Re: CP 200 Programing
Posted: Fri Jan 23, 2009 7:55 pm
by ASWEEZY1
not shure what REV# how would i find that out? and same results for other machines. USB adaptor works great for other cords like CDM
Re: CP 200 Programing
Posted: Fri Jan 23, 2009 8:48 pm
by HLA
the revision number is printed on the face of the cd.
Re: CP 200 Programing
Posted: Fri Jan 23, 2009 8:51 pm
by ASWEEZY1
cd is a blank copy.......................................
Re: CP 200 Programing
Posted: Fri Jan 23, 2009 8:52 pm
by Mfire39
ASWEEZY1 wrote:not shure what REV# how would i find that out?
When you run the CPS, in the top tool bar, there is a question mark (?) that says "about".. click on that..
-Marc
Re: CP 200 Programing
Posted: Fri Jan 23, 2009 8:57 pm
by ASWEEZY1
Re: CP 200 Programing
Posted: Sat Jan 24, 2009 6:17 am
by wavetar
Re: CP 200 Programing
Posted: Sat Jan 24, 2009 12:57 pm
by ASWEEZY1
yeah i have tryed that and am completly lost ........................................ any help??
Re: CP 200 Programing
Posted: Sat Jan 24, 2009 5:35 pm
by HLA
unfortunately in this case the help section don't tell you the region, that's why i asked for the revision number or part number on the cd. so if it's a blank cd then you didn't get it from motoroal, call them and order the correct cps and you will be in business. and i'd still get rid of the usb adaptor before you brick a radio with it.
