Batboard

i have the DGT9000 extended local unit that doesn't have the phone 4-wire jack...only the DB15 at the back. there is a pinout on this forum for programming, but i need the pinout for connecting to analog Spectra that is in a console without the control head. in other words: DB15 to DB25 pin connection to the back of the console.

ok, after long experimenting i think i have got it because it works. the model of the DGT9000 is L1650A it has the 15 pin connector,no RJ45 jack, the model of the radio is analog spectra console, no control head just the radio, the power supply and the board under the radio TRN7891A in a plastic box called console, model radio: L35ZXM5174AM
PINOUT is:
15pin connector________25pin connector J2 radio (bottom one)
1-----------------------------2
2 not connected
3-----------------------------7
4-----------------------------19
5 not connected
6-----------------------------6
7-----------------------------16
8-----------------------------1
9 not connected
10----------------------------11
11----------------------------3
12 not connected
now, you have to open the DGT9000 and see the pins on the circuit board that are connected to 15pin connector on the back. #1 pin is marked on the board and then everithing is just comprehensive by nature

Great, I have a L1650A. I shall try your hookup.

Has anyone got the manual or parts of the manual?