Batboard

I have some System Saber III's with the NTN5762B OTAR DES module. Which Key Loader and Cable do I need for these radios? Also How is the key loaded "Over the Air" and what equipment would I need to do this?
Thanks
Dave

RTK4203C or equivalent is the part # for the programming cable

OTAR - in short, unless you've got some specialized infrastructure equipment that isn't easy to come by on the surplus market, it won't be usable. Here's a link to a thread where it's discussed:
http://batboard.batlabs.com/viewtopic.p ... 31&start=0

The keyloader is a T3011 series. They are available in the following numbers: T3011BX, T3011CX, and T3011DX. The B, and C revs can be had pretty cheap, as they only load analog radios. When you buy one, make sure it has the hybrid in it.

Keyloader cable: TKN8506

Thanks for the info!

Dave