Page 1 of 1
CDM-1250 connections
Posted: Wed Mar 11, 2009 1:58 pm
by markscan
Hi all , I'm new at programming, so please forgive me if this question has been asked before. I'm going to program a CDM-1250. My programming cable has four different connectors. One looks like a microphone jack. Can I program using this method, or do I have to get to the back of the radio. Its in an ambulance console, so it will be easier if I could go in from the front. Thanks for any assistance!!
Mark
Re: CDM-1250 connections
Posted: Thu Mar 12, 2009 6:09 pm
by Jim202
You normally program the CDM through the mic jack unless it is remote mounted.
Jim
markscan wrote:Hi all , I'm new at programming, so please forgive me if this question has been asked before. I'm going to program a CDM-1250. My programming cable has four different connectors. One looks like a microphone jack. Can I program using this method, or do I have to get to the back of the radio. Its in an ambulance console, so it will be easier if I could go in from the front. Thanks for any assistance!!
Mark