Page 1 of 1
Southern Vehicle Equipment Hot Shot
Posted: Thu Apr 02, 2009 11:47 pm
by avguy
I have recently come into possession of a Southern Vehicle Products Hot Shot rotator.
It still has my father's green EMS dome on it (which is of no use to me for obvious reasons).
I would like an amber dome so I can use it on my plow truck next winter, so far I have come up with nothing on the interwebs.
It's worth noting that it is the original Hot Shot, not the current production model.
It is at least 15 years old.
Any parts sources, OEM or otherwise would be most appreciated.
Model 1175H
Hot Shot
Re: Southern Vehicle Equipment Hot Shot
Posted: Fri Apr 03, 2009 4:03 pm
by tiredfireman
I'd go to the SVP website and see what they have to say, OR at least get an 800 number to call for help. There HAS to be a bunch of those lenses laying around in stock. That's a dependable light (tho a little slow on the rotate). I still have one baking on my dash for volunteer use. Methinks it'd be perfect for plowing. _IF_ I can find a part number, I'll post it. Otherwise, best of luck. Some supplier out there has to have a couple they are eager to part with. SC
Re: Southern Vehicle Equipment Hot Shot
Posted: Sat May 02, 2009 8:16 pm
by n3obl
I think the current company that SVP is now signal i think they still make those. Should be able to get a lense.
Frank
Re: Southern Vehicle Equipment Hot Shot
Posted: Sun May 03, 2009 8:51 pm
by avguy
n3obl wrote:I think the current company that SVP is now signal i think they still make those. Should be able to get a lense.
Frank
The current production model is hotshot II, it is a different size.
Re: Southern Vehicle Equipment Hot Shot
Posted: Mon May 04, 2009 1:29 pm
by n3obl
check on lightbarn.com
Frank
Re: Southern Vehicle Equipment Hot Shot
Posted: Wed May 06, 2009 8:05 pm
by avguy
I can't search on Lightbarn.com or register.(Could not find email template file :: admin_activate)
Re: Southern Vehicle Equipment Hot Shot
Posted: Thu May 07, 2009 5:59 am
by Tom in D.C.
Open the Lightbarn.com website.
Go to the lower right part of the page and click on "New Member Guidelines."
Follow the prompts to register.
Worked fine as of May 7 at 10:00 a.m.