Batboard

Cannot get PTT IDs to show up on the console. Been back and forth with Motorola but still no luck. We're using a 1550LS+ w/ local gateway. Anyway have a similar set-up that's working?

Doing a search for MIP5000 turned up these two threads:

http://batboard.batlabs.com/viewtopic.p ... 00#p378797

See the first post by 'caprice96' in that one for MDC ID setting details in the CDSM.

http://batboard.batlabs.com/viewtopic.p ... 00#p378797

This thread mentions timing might be an issue due to latency on the IP network. A thorough read of the system planner on that section is suggested.

Todd