Batboard

Posted: **Thu Jul 09, 2009 12:32 pm**

I have an issue with an agency that purchased very early XTS2500's. The newer ones decode QCII, the olders ones refuse to.

Exact same codeplug.

The ones that do not are all in the V4-5 range for firmware.

Anyone know where the functionality for QCII decode was 'fixed' or 'added' to the firmware release? I need to survey these and determine which ones need to be refreshed.

-Thanks!

Posted: **Thu Jul 09, 2009 12:59 pm**

version 8 is what you'll need IIRC

Posted: **Thu Jul 09, 2009 2:14 pm**

Yup, I thought it was fairly high.

Now I have to get those radios in here from the other end of the state.....

Posted: **Thu Jul 09, 2009 3:10 pm**

If you have big cojones you could try to do it over the internet

Posted: **Thu Jul 09, 2009 3:22 pm**

We're talking rural Nevada. They *MIGHT* have Hughes satellite at best......

I will just get UPS involved. I would rather deal with that latency than Hughes....

Batboard

QCII Decode in early F/W XTS2500?

QCII Decode in early F/W XTS2500?

Re: QCII Decode in early F/W XTS2500?

Re: QCII Decode in early F/W XTS2500?

Re: QCII Decode in early F/W XTS2500?

Re: QCII Decode in early F/W XTS2500?