Review: NNTN7392A Impres Battery Reader
Posted: Fri Jul 31, 2009 5:26 pm
Finally got my kit today, installed the software and hooked it up to the computer. Battery information loaded immediately on the screen.
The following information is displayed:
Battery chemistry, part & serial number
Present charge (presented as a mAh figure as well as a percentage)
Current capacity (potential)
Rated capacity (factory)
Initial capacity (from first charge)
Then it gives the battery's manufacture date, date of first use, and number of days since last IMPRES charger and conditioning cycle. Also gives total number of IMPRES cycles, estimated non-IMPRES cycles, total reconditioning cycles and estimated time til next maintenance service.
It also displays the battery's current voltage and operating temperature, as well as a graph showing at which state the battery was in for the total number of charge cycles (i.e. 7 charges from 0-10%, 28 charges from 10-20%, 12 charges from 20-30% etc)
Also, and what's REALLY freaking cool, is the kit comes with two inserts-- one that lets you analyze MotoTRBO impres batteries and one that lets you analyze Pro Series (ht1250 etc) impres batteries. The analyzer is based on the WPLN4111AR charger.... so with these inserts, the WPLN4111AR can now charge TRBO and Waris impres batteries....very cool!
The following information is displayed:
Battery chemistry, part & serial number
Present charge (presented as a mAh figure as well as a percentage)
Current capacity (potential)
Rated capacity (factory)
Initial capacity (from first charge)
Then it gives the battery's manufacture date, date of first use, and number of days since last IMPRES charger and conditioning cycle. Also gives total number of IMPRES cycles, estimated non-IMPRES cycles, total reconditioning cycles and estimated time til next maintenance service.
It also displays the battery's current voltage and operating temperature, as well as a graph showing at which state the battery was in for the total number of charge cycles (i.e. 7 charges from 0-10%, 28 charges from 10-20%, 12 charges from 20-30% etc)
Also, and what's REALLY freaking cool, is the kit comes with two inserts-- one that lets you analyze MotoTRBO impres batteries and one that lets you analyze Pro Series (ht1250 etc) impres batteries. The analyzer is based on the WPLN4111AR charger.... so with these inserts, the WPLN4111AR can now charge TRBO and Waris impres batteries....very cool!