Batboard

anyone suceesful in making radius m10 into a regular gm300

Granted, I have never been inside of a M10.. but I would be more inclined to believe that a M10 is actually a crippled M120, which has a substantially different logic board than a GM300. So while you might be successful in blanking/reinitializing one into a M120, I doubt highly that you're going to get 16 channels and signaling out of one.

If you want to give it a crack, here's the instructions for blanking the logic board: http://batboard.batlabs.com/viewtopic.p ... initialize

Correct, the M10 contains the same limited logic as the M120, and factory 8-channel GM300. So, that'll be the best model you could initialize it as, then potentially hack it for some extra channels, but the signalling & other advanced features won't happen.

yes thanks. we blanked it and dump codeplug in it. got 16 channels but i new i would not get signalling