Page 1 of 1
Maxtrac / Radius modify max channel per zone
Posted: Sat Nov 14, 2009 4:40 pm
by videonerd
I have a 32 channel trunking Maxtrac (Smartsite G6) ... right now it's configured for maximum 6 channels with 6 zones. Is there any way to bump it up to 10 channels for 3 zones? The RSS says the parameters are defined elsewhere... but where?
Re: Maxtrac / Radius modify max channel per zone
Posted: Sat Nov 14, 2009 5:31 pm
by Josh
videonerd wrote:I have a 32 channel trunking Maxtrac (Smartsite G6) ... right now it's configured for maximum 6 channels with 6 zones. Is there any way to bump it up to 10 channels for 3 zones? The RSS says the parameters are defined elsewhere... but where?
I think you'll find the only way to add more channels is to replace the firmware ROM with one for a conventional maxtrac.
Re: Maxtrac / Radius modify max channel per zone
Posted: Sat Nov 14, 2009 5:56 pm
by videonerd
Sorry, my wording wasn't clear... I meant not to gain more channels overall, but to assign more channels per zone, Spectra-like. Instead of 6 channels in 6 zones for 32 channels, I'd like to have 10 channels in 3 zones + 2 conventional.