Batboard

i have a ht 750 16 channel radio with only two of the personalities programed. i have gotten pretty good at adding to the maxtrac and maratrac with the rss but i cant find the right place in cps. any help would be greatly appreciated. thanks

Working from memory without the cps in front of me - go to conventional and put in your freq and pl assignments; go to zone and put in your channel knob assignments. You have to right click on an existing channel to get a choice to add a channel.

The HT750 will only do 16 channels, never any zones.
Once you open the CPS, you will see tabs on the screen, these are:
Basic, Options, Signaling, Scan, Phone and Advanced

At the bottom of the screen, you will see a left arrow with a line(go all the way back) a left arrow(back one channel)
Right arrow and right arrow with a line, then a PLUS sign that should be green, if not, all channels are filled and no more can be added.
And the last sign is an X, and the last icon is a wide view of all frequencies programmed in the radio.

Once you open up the conventional personality, all programmed channels will be listed, first to last.
then you have options such as signaling and scan.
Power is set on a per-channel basis and can be slaved to a side button, the same goes for talkaround or scan, depending on your needs.

i got one of them all programed up and working. thanks for the info.

My pleasure!

We are all here to help each other.