Batboard

Does anyone happen to know what the pinout is for a RIBless CP200 programming cable (or what the programming/accessory socket pinout is)?

I am trying to see if I can build and adapter to program another radio and need to know what the pinout is in order to do so.

An image of the cable I am referring to is here: http://eb.kawagebo.net/Radio/MOTRLA/Pro ... LA_A1a.jpg

Thanks!

Here is the pin-out for the radio end:

http://batlabs.com/images/cp200.jpg

Will,

Thanks for that. I've seen that image already, but I am assuming (probably incorrectly so please feel free to correct me if I am indeed wrong) that the RIBless cable seems to have a different configuration (The tip, ring and sleeve of the 2.5mm connector correspond to the TX, RX and GND lines somehow). I just can't seem to find the correct combination.

Maybe I should rephrase that as a question -- Does anyone know if the RIBless cable would have a different pinout than the one linked to above?

Thanks!