Mnual needed: RCS1000 controller
Posted: Mon Feb 08, 2010 4:13 pm
I have an RCS1000 controller in a 1RU enclosure that runs a pair of GE MCS UHF mobiles.
The problem I am having; is NOT having the manual covering programming data, pinouts and associated software for the critter.
I was hoping to use this to run a couple of Maxtracs, but without the information, I am at a loss.
The company this was obtained from sold it and either kept the documentation, or tossed it out, Ergo; no data with which to work from.
I tried searching the web, but nothing useful came back about 'Comtronix', or RCS1000.
So.......I would love to beg or borrow a copy so I can dive into this and make it work.....if possible.
The last GE radios I worked on were Orions and Phoenix.....
Any assistance would be greatly appreciated!!
Thank you!
The problem I am having; is NOT having the manual covering programming data, pinouts and associated software for the critter.
I was hoping to use this to run a couple of Maxtracs, but without the information, I am at a loss.
The company this was obtained from sold it and either kept the documentation, or tossed it out, Ergo; no data with which to work from.
I tried searching the web, but nothing useful came back about 'Comtronix', or RCS1000.
So.......I would love to beg or borrow a copy so I can dive into this and make it work.....if possible.
The last GE radios I worked on were Orions and Phoenix.....
Any assistance would be greatly appreciated!!
Thank you!