Batboard

A neighboring FD got a hold of some Advisor Golds set on the proper VHF county frequency. HOWEVER they set the baud rate for 2400 instead of 1200.

I read it with proper software, change the baud rate, and it gives me the nasty gram frequency out of receiver range or something along those lines.

Is there a way to force the pager to accept the frequency like they obviously had to before I touched it??

Thanks

bump.... still meddling with this stupid thing

What software are you using to read them with?

Okay the Advisor Gold has been fixed. (Was using UNI Software)

However now I have the same issue on a Unication Gold

Using software version R06.15.12 2007/11/22
Pager programming software for PRODUCT - ALPHA GOLD

Pager is currently on 152.2450
Need to go to 154.785

Says Verizon Wireless on the outside so possibly an ex Verizon Pager.
Does have the green stripe in the button so I thought that meant elite but the markings on the back say it is a gold.
(Tried the elite software with no success at all)

Model Number: A3A1ADV2213A

When changing the frequency to anything 153.000 and above it says "WARNING: Frequency entered is not in the range of the reciever Any other key to abort"

I can't get past that screen and I don't know why.

Any ideas?

Just a guess here... but with that information it seems as if the upper end of that units receiver is 153.000 Mhz. Their 152.xxx was in range, but the 154.xxx you are taking it to is out of range. As far as modifying the Advisor/Elites out of band, no idea.

Sikdmax wrote:Just a guess here... but with that information it seems as if the upper end of that units receiver is 153.000 Mhz. Their 152.xxx was in range, but the 154.xxx you are taking it to is out of range. As far as modifying the Advisor/Elites out of band, no idea.

That was my guess as well.... Its odd a Gold can do it along with a Advisor II... maybe someone can help me take it out of band