Page 1 of 1

CDM 1550 LS + extra board ?

Posted: Wed Feb 10, 2010 6:40 am
by arlojanis
I opened a later model VHF CDM1550 LS + and there was an extra board mounted to the top lid and plugged into the main board. What is this extra board ?

Re: CDM 1550 LS + extra board ?

Posted: Wed Feb 10, 2010 6:44 am
by RadShop
Did it look like an HT series Keypad?

It's the PassPort board.

Re: CDM 1550 LS + extra board ?

Posted: Wed Feb 10, 2010 6:52 am
by RFguy
Is there a part# on the board? It could be a voice storage board.

Re: CDM 1550 LS + extra board ?

Posted: Wed Feb 10, 2010 10:18 am
by AEC
Aside from the PassPort board, and the recorder board being an option, there are also the inversion scramblers being used in the same location, under a chromed, plastic cover.

I have CDM750 that has this board.

And yes, it looks like a Waris keypad with the same ribbon flex.

My options board # on one of the chips(EEPROM)is: 3779607, V5C, 11/03, 177985.

I suspect this is Rev. V5C, and programmed on 11/03.

Board has the typical LCD connector header, as well as the header for the ribbon flex.

Pretty adaptable board, since it 'goes portable' mobile and who knows what other radios this board has been stuffed into now.....

Re: CDM 1550 LS + extra board ?

Posted: Thu Feb 11, 2010 2:56 pm
by com501
CDM1550LS+ ships with passport installed on all the ones I have seen lately.