Batboard

Is there any (EASY) way to get a discriminator tap on MTS 2000 Flash port?

Thanks.

On the transceiver board, it is the interconnect header for the controller board, pin #10, lower left near the board edge(corner).

The conenctor is a 20 pin header which connects the controller board to the transceiver board.
11 12 13 14 15 16 17 18 19 20
[: : : : : : : : : : ] <---Interconnect header(to controller)
10 9 8 7 6 5 4 3 2 1

Reference Oscillator is on pin 5

Lock Detect is pin 4

RSSI is pin 11

Squelch Out is pin 12

VCO Modulation is pin 3

Switched B+ is pin 2

Thank you.