2 CDM-1250's and RICK Repeater Ignition Sense
Posted: Mon Mar 01, 2010 4:38 pm
Have 2 1250's attached to a RICK repeater. On their own, Pin 10 of the accessory of the 1250 would go to the ignition. With the RICK attached to both radios, Can I use Acc J4 on the RICK and Pin 10 on the RICK to control both 1250's to power Up/Down on Igintion ? I have tried this and the radios power up on ignition, however do not power down when ignition is shutdown....
Any Education on this would be appreciated
Craig
Any Education on this would be appreciated
Craig