Page 1 of 1
I need help in ID'ing an Moto Auzzie Loco radio.
Posted: Wed Mar 03, 2010 8:45 pm
by n7maq
Hello,
A friend is trying to ID the radio in the picture. I know the picture is not that good, it is just screen shot from a Youtube video. If you can help that would be great!!
It kind of reminds me of a GE MLS.
IIRC this C/H looks kind of like the 4 channel RR Micor heads. Note the PTT on the backside of the handset.
Here is a link to the youtube video this is from. If you watch it you will also see a an MCS2000 but we are not worried about it.
http://www.youtube.com/user/Rocketboy19 ... x5gMYW4hO0
Thanks,
Jim.
Re: I need help in ID'ing an Moto Auzzie Loco radio.
Posted: Thu Mar 04, 2010 1:33 pm
by Will
The control head in T417 is RailRoad Micor. 12 channel IIRC.
Re: I need help in ID'ing an Moto Auzzie Loco radio.
Posted: Thu Mar 04, 2010 4:47 pm
by KitN1MCC
some kind of data radio
Re: I need help in ID'ing an Moto Auzzie Loco radio.
Posted: Thu Mar 04, 2010 6:35 pm
by Tom in D.C.
Data radio? With a handset, volume control, and speaker switch?
Re: I need help in ID'ing an Moto Auzzie Loco radio.
Posted: Thu Mar 04, 2010 6:52 pm
by abbylind
I believe they were referring to the radio on the upper part of the cab. Kinda looks like a Maxar 80 case
Fowler
Re: I need help in ID'ing an Moto Auzzie Loco radio.
Posted: Sun Mar 07, 2010 11:00 am
by KitN1MCC
the one on the wall
Re: I need help in ID'ing an Moto Auzzie Loco radio.
Posted: Sun Mar 07, 2010 6:09 pm
by motorola_otaku
Yeah, I would almost guess you were looking at 3 separate radios here: the one with the telephone-style control head (Syntrx?), the Maxar-clone on the wall, and the MCS, which may be a GM1200. IIRC railroads in Australia run 403-430 now and may even be trunked in some areas using MPT1327 or Smartnet.
*paging MattSR or rodgrech*
Re: I need help in ID'ing an Moto Auzzie Loco radio.
Posted: Sun Mar 07, 2010 7:22 pm
by MattSR
Correctski - railroads in NSW are a bit of a mixture.. Theres some stuff on 412-420, some on VHF, and some GSM-R stuff too.
Some is MPT I believe, theres some stuff on the GRN (Smartzone Omnilink) and some simplex stuff.
I never really got into railways monitoring simplex cause its too complex. And ultimately boring

Re: I need help in ID'ing an Moto Auzzie Loco radio.
Posted: Wed Mar 10, 2010 12:19 pm
by RADIOMAN2002
The data head on the wall looks like a Lite version of the old transit radio's used by Westchester County New York. You had to request a channel for talking by pushing the request button. The head would also send all kinds of data, whether it was location or engine temperature back to the dispatch center.
Re: I need help in ID'ing an Moto Auzzie Loco radio.
Posted: Wed Mar 10, 2010 3:41 pm
by n7maq
Thanks to all. I did receive some pictures of some Auzzie locomotives, and there are radios all over the place in them. I'll post them here in a day or two.
Jim
Re: I need help in ID'ing an Moto Auzzie Loco radio.
Posted: Wed Mar 10, 2010 6:01 pm
by KitN1MCC
seems like the auzzie railroads dont have a set freqs and standards like we do here
i think railroad radio chatter to be fun