Batboard

ok guys, need a little technical help here, I have a Spectra with a standard (large) hand mic, and I want to re-wire a HMN1056d (small) mic to the spectra, but am running into a brick wall finding wiring diagrams for either mic, now I know that the large mic only uses 5 wires (yellow is cut flush) but I dont know if the 1056d is the same way.

any and all help would be greatly appreciated.

Your best bet is to do what I did. I call motorola and ordered the detailed service manuals for the equipment that I have. Most of the information is going to be in the manuals. It has been the best thing that I could have done. The most that I have payed is 35.00 shiping is 7.00 ground and the lowest I have payed was 7.50 for the manual

Jerry

We should have these Mic cable colors available for others to use.

Spectra Mic:

Red Mic hi
BLK Mic lo
GRN PTT
WHT GND
BLU HUB


Maxtrac HLN5238A heavy duty/Mitrek style Mic:
GM 300 Black Mic:

Red Mic Hi
BLK Mic Lo
GRN PTT
BLU HUB
YEL not used
WHT Handset earphone audio

Thank you Very Much Will, I really appreciate your taking time to help me.