Batboard

I've seen people talking about it on here, but still havent quite figured it out... and now that I've had an MTR go down, I'm kind of in a pinch...

Have a L3276A Tone Remote hooked to a CDM via the 16 pin connector. Trying to figure out how to do mode steering via tone from my console (IE: 1950 hz = Ch 1, 1850 hz = Ch 2, etc.). Anybody able to give me a quick and easy tutorial on here? Thanks!

There are a number of companies that have provided information on how to connect up their remote termination
panels to the CDM radio. You might try looking some of those companies up on the internet and collecting the
documentation they provide.

Jim

jayres wrote:I've seen people talking about it on here, but still havent quite figured it out... and now that I've had an MTR go down, I'm kind of in a pinch...

Have a L3276A Tone Remote hooked to a CDM via the 16 pin connector. Trying to figure out how to do mode steering via tone from my console (IE: 1950 hz = Ch 1, 1850 hz = Ch 2, etc.). Anybody able to give me a quick and easy tutorial on here? Thanks!