Page 1 of 1
MSF10000 resets on TX
Posted: Mon May 10, 2010 5:35 am
by Paul
My newly acquired CXB MSF10000 when triggered, performs a system reset.
I have a very basic knowledge of it; am I missing something?
73 de SV2US
Re: MSF10000 resets on TX
Posted: Mon May 10, 2010 7:18 am
by xmo
This will happen if the station is equipped with a battery revert power supply and was configured to use a battery but now you don't have a battery connected.
The power supply was originally adjusted to provide the right float voltage for a particular battery type. Without a battery connected the supply voltage will drop too low on keyup and the station will reset.
You can fix this by a) re-adjust the power supply per the manual for the correct voltage with no battery, b) turn down the transmit power so it draws less current or c) connect a battery to the station.