Batboard

HI to all
I have a GM360 that i lost the password when i locked it . Pse how to reset the radio or how to retrieve my password that i lost.
Regards & thanks in advance
Said.

is it a power on password or cps password to read the radio?

Hi HLA
No, it's a cps password to read the radio.
Said

Hex Editor that will read RAM, look for the serial number in Ram, and a few lines down you will see the password


>>>Hardwire<<<

Start a hex editor. Start the programming software, read the radio. When you are prompted for the password go to the hex editor. Open RAM, open the GP300. Search the serial number. You will find it followed by model number "M25RHC9AN1" or something according to the model of your radio. Count 33 characters after the model number. Write down the hex values of the next two characters (34 and 35). Convert their value into decimal. the value is the password.

Hi hpdvn & all others
I converted the 34 and 35 and also tried 35 and 36 but seems not the right number.
Here is what read the Hex Editor, hope it will help.

00005dd0:00 94 87 04 00 52 61 64 69 6f 20 4c 6f 63 6b 20 .”‡..Radio Lock
00005de0:50 61 73 73 77 6f 72 64 00 08 00 00 00 02 00 00 Password........
00005df0:00 86 87 07 00 52 61 64 69 6f 20 4d 6f 64 65 6c .†‡..Radio Model
00005e00:20 4e 75 6d 62 65 72 00 08 00 00 00 02 00 00 00 Number.........
00005e10:94 87 04 00 52 61 64 69 6f 20 4f 6e 20 4d 65 73 ”‡..Radio On Mes
00005e20:73 61 67 65 00 08 00 00 00 02 00 00 00 48 15 08 sage.........H..

Vy tnx in advance
Regards
Said.