Page 1 of 1

Install Ford Falcon FG XR6 (Aust)

Posted: Wed Jun 23, 2010 10:09 pm
by damofordfestival
Hi all,

I have been on the side lines learning lots thank you. I thought I would share my install in my
Ford Falcon XR6 (Australia) install. It consists of:
Motorola XTVA
XTS3000
HHCH
Speaker
and glass mount antena.
The XTVA is hidden away under the passangers seat out of site.

http://picasaweb.google.com.au/lh/photo ... directlink
http://picasaweb.google.com.au/lh/photo ... directlink
http://picasaweb.google.com.au/lh/photo ... directlink
http://picasaweb.google.com.au/lh/photo ... directlink

Re: Install Ford Falcon FG XR6 (Aust)

Posted: Thu Jun 24, 2010 5:16 pm
by Jim202
damofordfestival wrote:Hi all,

I have been on the side lines learning lots thank you. I thought I would share my install in my
Ford Falcon XR6 (Australia) install. It consists of:
Motorola XTVA
XTS3000
HHCH
Speaker
and glass mount antena.
The XTVA is hidden away under the passangers seat out of site.

http://picasaweb.google.com.au/lh/photo ... directlink
http://picasaweb.google.com.au/lh/photo ... directlink
http://picasaweb.google.com.au/lh/photo ... directlink
http://picasaweb.google.com.au/lh/photo ... directlink


Didn't the antenna instructions say anything about not mounting the glass mount over the heater strip on the window?

Re: Install Ford Falcon FG XR6 (Aust)

Posted: Thu Jun 24, 2010 7:14 pm
by damofordfestival
It sure did, but the Ford XR6 has a square marked area at the top centre of the rear window with no heater strips which is specially made to mount a cellular/glass mount antena, so no probs with any heater strip running under the mount.