Page 1 of 1
What handheld for 396 - 403MHz?
Posted: Mon Jun 28, 2010 4:50 pm
by Tony.RI
If I understand correctly, the only Motorola radios in that band from the factory is the XTS 2500 and 5000? Are there any others out there? I only need analog and a handful of channels, not all the features, (not to mention the expense,) of the Astro radios. Will an R-split HT1000 work that far out of band? What about a gov split Saber?
Re: What handheld for 396 - 403MHz?
Posted: Mon Jun 28, 2010 6:26 pm
by KI4RGV
The fed split on a saber is 403-433 MHz. What are you trying to do that low? Inter-Squad Radio frequencies (ISR)???
Peter.
Re: What handheld for 396 - 403MHz?
Posted: Tue Jun 29, 2010 2:53 am
by Jim202
KI4RGV wrote:The fed split on a saber is 403-433 MHz. What are you trying to do that low? Inter-Squad Radio frequencies (ISR)???
Peter.
I believe that there are a couple of other companies that have radios able to cover those channels. The
EF Johnson 5100 can be obtained for that range 380 to 470. Think Kenwood also has one, maybe Icom.
Jim
Re: What handheld for 396 - 403MHz?
Posted: Tue Jun 29, 2010 8:17 am
by mike m
GE Ma/Com, Harris, whoever they are now, have the P5100, P5400 and P7100 HT's which cover 378 to 430 MHz in their low UHF models.
Mike
Re: What handheld for 396 - 403MHz?
Posted: Sat Jul 03, 2010 12:30 pm
by DPL
I have never tried taking a 403-470 HT1000 out of band, but I have used 450-512 ones down to at least 442, so if this holds for the 403-470 radios you should be able to take one down to at least 395. This is speculation, of course, but if you have HT1000s already it might be worth a try.
Re: What handheld for 396 - 403MHz?
Posted: Tue Jul 06, 2010 10:18 pm
by lalaforu
thanks for heads up