Page 1 of 1
Astro Saber 3 shows Key Fail
Posted: Sat Jul 10, 2010 7:26 am
by AstroSaber3
Hello
My AS3 shows Key Fail on the Display, when i select Secure Encryption and push the PTT. What is the reason for that?
And how can i remove that?
Sincerely yours
Astro Saber 3
Re: Astro Saber 3 shows Key Fail
Posted: Sat Jul 10, 2010 7:46 am
by Tom in D.C.
Ignore it. It means that you have no secure key loaded into the radio. Keep the secure switch in the OFF posititon until you get keys loaded.
Before you load a key or keys into the radio be sure you have checked in the CPS that you have the radio set to "Infinite Key Retention," otherwise when you remove the battery you will lose all of the loaded keys.
Also, you should be using the help files of the CPS to learn all the ins and outs of this somewhat complicated radio.
Re: Astro Saber 3 shows Key Fail
Posted: Sat Jul 10, 2010 11:21 am
by AstroSaber3
Hello
What must i do (in the CPS) that i can Load Keys in to a Astro Saber 3 with Multikey? I have a DES Modul inside, i have a T3011dx, but it doesn't work.
It shows always Key Fail, and very short shows me when i select from clear to secure HWKey 1? What kind of adjustment must i do?
Sincerely yours
Astro Saber 3
Re: Astro Saber 3 shows Key Fail
Posted: Sat Jul 10, 2010 2:12 pm
by mancow
You need a KVL key loader device.
Re: Astro Saber 3 shows Key Fail
Posted: Sat Jul 10, 2010 2:33 pm
by AstroSaber3
No no, i have other Astro Saber´s Loadet with Key´s, but this Radio have a Flashcode with Multikey and i dont know what is to do.
Sincerely yours
Astro Saber 3
Re: Astro Saber 3 shows Key Fail
Posted: Sat Jul 10, 2010 2:51 pm
by mancow
Oh, I overlooked the part where you said you have a KVL. Did you not try to load the various slots or are you saying you don't know how to do that?
Re: Astro Saber 3 shows Key Fail
Posted: Sat Jul 10, 2010 3:30 pm
by AstroSaber3
I see two slots (Slot A and Slot B), but i dont know witch i need. I use only one Key, i need no more. Also i have right now my CPS started. In the "Secure Hardware Encryption Multikey-1 of 1" is written : CKR (is Blank) Key Name (HwKey 1) Index (is not enabled) Slot A (is 0) Slot B (is also 0). Or is a other adjustment wrong by the Secure Configuration ?
Re: Astro Saber 3 shows Key Fail
Posted: Sun Jul 11, 2010 10:02 am
by AstroSaber3
Hy @ all
Anyone have any idea? I don't know what can i do.
Sincerely yours
Astro Saber 3
Re: Astro Saber 3 shows Key Fail
Posted: Sun Jul 18, 2010 6:45 am
by AstroSaber3
Hy
Pleas can anyone help my, it´s very important. I have a Astro Saber 3 with Multikey, i have a T3011DX and a DES Modul is in the Saber installed.
It doesn't work to load Key´s on the Radio, it shows always Key Fail on the Display when i swich to secure Mode. What can i do?
Sincerely yours
Astro Saber 3