Page 1 of 1
MT2000 codeplug ?
Posted: Tue Jul 13, 2010 10:09 pm
by Will
I have a MT2000 UHF hi range that had a 15 key/display front. I changed to a 6 key/display front not needing the extra buttons. Of course the radio does not see the 6 keys. Radio still works fine and I can read/program ok.
What can I do? Change the model number?
TKS
Re: MT2000 codeplug ?
Posted: Fri Jul 16, 2010 2:18 pm
by maxkelley_kc2spy
Use Lab RSS and, from the main menu with the codeplug loaded, hit F4-F9-F3-F4 and change what you need in there. Mine says Keypad type: Menu & Num Keys;Display Type: 1 Line 14 Chars; HHCH Capable: Disabled;Button Debounce(ms): 50; Synth out of lock: disabled;Zone/Chan Select: Last Zone.
Hope that helps some!
Re: MT2000 codeplug ?
Posted: Sat Jul 17, 2010 2:02 pm
by Will
Lab RSS? Which part number would that be for a MT2000 radio?
May have to send it out to someone who has the 'proper stuff'!
Re: MT2000 codeplug ?
Posted: Thu Jul 29, 2010 5:15 pm
by Will
Still need help on this one....