Page 1 of 1
XPR8300 Firmware Question
Posted: Wed Aug 25, 2010 5:48 am
by vb105
I updated our VHF XPR8300 Repeater to the latest firmware. We are running on 1 Channel, Analog only. Since the firmware update all receive audio from distant stations has been quite poor. Audio was great before the update. Anyone experience this same issue? Do you lose the softspot values in the tuning when updating the firmware?
Re: XPR8300 Firmware Question
Posted: Sun Aug 29, 2010 3:56 pm
by vb105
Bump!
Re: XPR8300 Firmware Question
Posted: Mon Aug 30, 2010 2:48 am
by MotoFAN
Poor quality in TRBO mode or analog?
Tuning values should be preserved after FW upgrades.
Re: XPR8300 Firmware Question
Posted: Mon Aug 30, 2010 4:18 am
by vb105
MotoFAN wrote:Poor quality in TRBO mode or analog?
Tuning values should be preserved after FW upgrades.
Repeater is operating in Analog mode. I looked at the tuning values before the firmware upgrade and after and they are exactly the same. This repeater is also operating in narrowband 12.5khz.
Re: XPR8300 Firmware Question
Posted: Mon Aug 30, 2010 4:27 am
by rc50won
vb105 wrote:MotoFAN wrote:Poor quality in TRBO mode or analog?
Tuning values should be preserved after FW upgrades.
Repeater is operating in Analog mode. I looked at the tuning values before the firmware upgrade and after and they are exactly the same. This repeater is also operating in narrowband 12.5khz.
Set it back to 25khz and things should return to normal.
Marshall
Re: XPR8300 Firmware Question
Posted: Mon Aug 30, 2010 4:32 am
by MotoFAN
What exactly you call
quite poor audio
?