Batboard

Hi all!

We get a bunch of new XTL2500 radios with M5 remote head. They work fine, but control head power-up process a little bit strange. Look at video and you will see: http://www.youtube.com/watch?v=d-pWFR5JwSc

After that radio works just fine. No any problems with display and operation at all.

We have checked two different XTL2500 sets and both works identically.

Any ideas or suggestions?

P.S.
These radios come from factory with R12.xx.xx Firmware and DPS and not yet upgraded to R14.xx.xx.

Welcome to the wonderful world of LCDs.. I would not be worried about it.

MotoFAN wrote:Hi all!

We get a bunch of new XTL2500 radios with M5 remote head. They work fine, but control head power-up process a little bit strange. Look at video and you will see: http://www.youtube.com/watch?v=d-pWFR5JwSc

After that radio works just fine. No any problems with display and operation at all.

We have checked two different XTL2500 sets and both works identically.

Any ideas or suggestions?

P.S.
These radios come from factory with R12.xx.xx Firmware and DPS and not yet upgraded to R14.xx.xx.

Very normal. We have hundreds of them, that do this when its been a while since power up.
B.

Thanks to all!

XTL5000 with M5 or O5 head works similar?

MotoFAN wrote:Thanks to all!

XTL5000 with M5 or O5 head works similar?

Yes.

B.

Interesting :) Thank you!

P.S.
With connected iginition sense wire or in local control head confg XTLs works similar?

What does mean flashlight icon at the top left corner of display?

|\___________
| ___________|
|/

I hopes that it's Monitor, but it does NOT.

Any ideas?