Page 1 of 1
Motorola MRTI2000 Interconnect
Posted: Sat Sep 04, 2010 8:35 am
by A911Pro
Hi, Does anyone have the cable pin-out for the RJ45 to RS232 programming cable?
Thanks, Don
Re: Motorola MRTI2000 Interconnect
Posted: Sat Sep 04, 2010 1:48 pm
by escomm
Re: Motorola MRTI2000 Interconnect
Posted: Sat Sep 04, 2010 6:49 pm
by MSS-Dave
I think he might be looking for this one....
http://www.batlabs.com/images/mrti2k.gif
Dave
Re: Motorola MRTI2000 Interconnect
Posted: Wed Sep 15, 2010 1:38 pm
by A911Pro
Thanks guys, the cablle seems to work fine. I'm trying to use a terminal program (Termite or Winterm) to program it because the Motorola software is way to expensive. Anyway, when the patch is connected to the computer it doesn't respond to hitting enter 5 times, per the manual. I know the cable is good because I can read the patch with the GAI-Tronics software which I have. Can't write to it however because it's a Motorola unit and requires RSS to write. It does however echo [00] to the terminal software when powered up or down. Anyone have any ideas on this? -Don
