Batboard

ok guys im in need of some expert help here, I have been reading the forums on astro stuff since 1030 pm and its now 330 am im new to the astro line and have rather become a big fan, but im not sure of all the flashcodes and such, i have learned quite alot by browsing the board looking for the answers, so if i can get this one answered i would appericate it

ok here it is xts 5000 f/c 509008-001687-0 this radio does not do mcd or qc-II is that correct? if so can it be flashed to do so?

the other is an xts2500 f/c 5a1018-10178c-5 again this radio does not have mcd or qc-II is this correct? and can this one be flashed to do so,


jeffrey

Both radios will do MDC-1200 signaling even if the flash codes were only H35 conventional only.

The QCII is available on the XTS5000 after HOST 9 if I am not mistaken?Not sure on the firmware version needed on the XTS2500.The QCII is a standard option on both radios.

QCII needs Host R08.00.00 or higher to work.. This applies to the entire Astro25 line..


-Marc

Awsome Thanks Guys!,