Page 1 of 1

Rib to cable adaptger

Posted: Mon Nov 29, 2010 3:12 pm
by nylawman
I need to make a programing change in my Astro Spectra W3. I have a Motorola rib box, a Polaris Spectra/Astro Spectra trunk mount/hi power cable and the cable that goes from the laptop serial port to the rib box. What i am apparently missing is the adapter that goes between the cable and the smaller serial port. Can anyone identify the adapter by name and suggest where I might obtain one (preferably a local electronics/computer supply store)?

Re: Rib to cable adaptger

Posted: Mon Nov 29, 2010 3:47 pm
by Bill_G
Do you mean a DB25 male (rib cable) to DB9 female (laptop serial port) adapter?

Re: Rib to cable adaptger

Posted: Mon Nov 29, 2010 4:33 pm
by n7maq
If you have a RLN4008 then you need a 15 pin connector for the rib. You would be best to build one, I assume that your computer has a 9 pin RS232 port. I have not seen an off the shelf modem cable going from a 9 pin (PC) to a 15 pin (RIB). The below link will show you how to build one.

http://www.batlabs.com/pinouts.html


Jim

Re: Rib to cable adaptger

Posted: Mon Nov 29, 2010 7:27 pm
by N4KVE
Polaris sells exactly what you want on their 4th page of cables. Radio Shack sells them too & that's what I use, but I will get the Polaris one soon as it's only 1 foot long. GARY N4KVE