Batboard

My xts 3000 was working fine then it "locked up" and I can't hear any audio all I hear is something like white noise. The buttons and controls all work, but I can not receive any freq that i have programmed as conventional but are on a trunked system. I do not have a system key nor did I. When I switched to my local fire ground zone (programmed as a different zone) the noise that was coming out of the speaker stopped. I tried to reinstall the codeplug nothing I made a new codeplug from the orginal from a year ago still the same out come. Any help would be great thank you.

what happened before it can't receive any frequency?

did you broke it or something?

maybe its a physical damage bro

rjm345 wrote:My xts 3000 was working fine then it "locked up" and I can't hear any audio all I hear is something like white noise. The buttons and controls all work, but I can not receive any freq that i have programmed as conventional but are on a trunked system. I do not have a system key nor did I. When I switched to my local fire ground zone (programmed as a different zone) the noise that was coming out of the speaker stopped. I tried to reinstall the codeplug nothing I made a new codeplug from the orginal from a year ago still the same out come. Any help would be great thank you.

Is the "white noise" that you hear constant before you switch to the fireground zone?

Could have the system converted to digital? If so are your RX channels set for mixed mode?

Are you able to receive anything on your fireground zone?

Do you have any transmit channels? If so does it TX OK?

Do you have a local NOAA channel programmed in? If so does it RX? If not try that and see.

Are there any error codes displayed on or radio?

Jim.

Is the "white noise" that you hear constant before you switch to the fireground zone?
Yes

Could have the system converted to digital? If so are your RX channels set for mixed mode?
I have it set in mixed mode

Are you able to receive anything on your fireground zone?
not sure we have not had a fire yet to use it

Do you have any transmit channels? If so does it TX OK?
Yes I tested it with a radio at my fire house we have a 800mhz trunked and I don't use it trunked

Do you have a local NOAA channel programmed in? If so does it RX? If not try that and see.
It's 800mhz n/a

Are there any error codes displayed on or radio?
No system check is fine starts up and the noise starts no codes