Page 1 of 1
mcs2000 TX and RX alignment Procedure
Posted: Sat Dec 04, 2010 4:16 pm
by Yobbo
Hello, I am looking for the alignment procedure for the UHF 100w MCS2000
I have the CPS tuner software (cant remember what version, although it is a late version) and am using a HP8924c service monitor ( I know how to use the HP)
thanks in advance
Re: mcs2000 TX and RX alignment Procedure
Posted: Sat Dec 04, 2010 11:57 pm
by akardam
The alignment procedure is covered in detail in the basic service manual. It is strongly advised that you have it handy when you are going through the alignment procedure. A hard copy can be purchased from Motorola, or a PDF copy can be downloaded if you have access to Motorola Online.
Re: mcs2000 TX and RX alignment Procedure
Posted: Sun Dec 05, 2010 3:10 am
by Yobbo
Thanks Akardam, Im Located in Australia, any my MOL is for Asia, and as these 100w radios were never sold in this region there is no support for them, I purchased this radio on a recent trip to the USA, thanks I will look elsewhere on line for the basic service manual
Thanks again, and have a nice day
