Batboard

I'm looking for the fuse values for both the red power and yellow ignition sense wires for a remote mount M5 head XTL2500.

The installation manual says to use either a 3 or 4 amp for the ignition sense wire, but doesn't say what to use for the power wire.

Thanks,

Tom

I have a new cable set for the XTL head sitting here still in the M bag...the red wire fuse holder has a 5 amp blade and the yellow wire fuse holder has a 3 amp blade. -Jeff

JeffFireRadio wrote:I have a new cable set for the XTL head sitting here still in the M bag...the red wire fuse holder has a 5 amp blade and the yellow wire fuse holder has a 3 amp blade. -Jeff

Thanks, that's what I needed to know!