Batboard

Hello,

I'm looking for info on how to flash a MTS2000 VHF to a MTS2010 (German BOS version). The same info is wanted for the 4m model.

I know it is possible, but not exactly sure how. Hope someone can give me some directions.

Any help is much appreciated.

Regards,
Robert.

Look at my homepage for more infos (German language only).If you have a modified RIB or Unirib,it´s not very hard,to flash it into a MTS 201x.
You must have the MTS2000 with the front display and keypad.
You need the 2100 series lab upgradetool and the MTS201x lab firmware/codeplugs.

Andreas