Page 1 of 1
Will My XTS5000 Work?
Posted: Wed Feb 02, 2011 10:55 am
by fallspolice
Can anyone tell me if my XTS5000 will work on a Project 25 Phase 1 or Phase 2 system TDMA system? The following radio Reference links show the exact systems that I am referring to. Thanks in advance for your help!
Re: Will My XTS5000 Work?
Posted: Wed Feb 02, 2011 11:37 am
by fallspolice
Re: Will My XTS5000 Work?
Posted: Wed Feb 02, 2011 12:43 pm
by CTAMontrose
The XTS5000 is not capable of operation on either X2 TDMA nor P25 Phase II. For either of these systems you will need a properly flashed APX radio.
Re: Will My XTS5000 Work?
Posted: Wed Feb 02, 2011 1:38 pm
by fallspolice
Thank you for that information. Just to verify, it will work with a phase 1 P25 system?
Re: Will My XTS5000 Work?
Posted: Wed Feb 02, 2011 1:55 pm
by n7maq
fallspolice wrote:Thank you for that information. Just to verify, it will work with a phase 1 P25 system?
What is your falshcode and model number?
Re: Will My XTS5000 Work?
Posted: Wed Feb 02, 2011 2:02 pm
by fallspolice
540008-001487-3 flashcode
H18uch9pw7an model number
Re: Will My XTS5000 Work?
Posted: Wed Feb 02, 2011 3:07 pm
by n7maq
Here are your options installed, so your radio should work on a P-1 P25 700/800Mhz system.
Decoding Flashcode: 540008-001487-3
Platform: XTS5000
Q806: ASTRO IMBE Digital Operation
H14: Enhanced Digital ID Display
H869: Hardware Multikey Encryption
H38: SmartZone Systems Operation
Q947: APCO Packet Data Interface
Q173: SmartZone Omnilink MultiZone Operation
Q361: ASTRO 25 9600 Baud Trunking
Q445: Fireground Accountability Software
Q446: Fireground Voice/Channel Announcement
Q667: ADP Software Encryption
<A HREF='
http://www.akardam.net/moto/tools/decode4.pl'>Decoded by the akardam.net FC Decoder v4</A>