MSF5000 PL Encode Problem
Posted: Thu Mar 31, 2011 10:37 am
Hey all!
I'm having a PL encoder problem with an MSF5000 C74CXB unit I have and looking to see if anyone can help. Essentially, I have tuned the MSF per the manual's alignment procedure, however when I encode a PL of 103.5 Hz, the PL is encoded properly, but it sounds as though another signalling type is also being encoded at the same time. I thought initially that I may have had the deviation too high, however I've set it at the right level and this problem still exists. When I disable the TX PL, nothing is sent and the carrier sounds normal.
Can the MSF have multiple signalling types encoded at the same time, causing such a problem to occur?
Thanks!
Don
VA3XFT
I'm having a PL encoder problem with an MSF5000 C74CXB unit I have and looking to see if anyone can help. Essentially, I have tuned the MSF per the manual's alignment procedure, however when I encode a PL of 103.5 Hz, the PL is encoded properly, but it sounds as though another signalling type is also being encoded at the same time. I thought initially that I may have had the deviation too high, however I've set it at the right level and this problem still exists. When I disable the TX PL, nothing is sent and the carrier sounds normal.
Can the MSF have multiple signalling types encoded at the same time, causing such a problem to occur?
Thanks!
Don
VA3XFT