Page 1 of 1
BPR40 available frequencies
Posted: Thu Apr 28, 2011 1:33 pm
by arlojanis
BPR40 specs say that VHF frequencies must be evenly divisible by 6.25 kHz or 5 kHz. Does this also apply to UHF frequencies?
Re: BPR40 available frequencies
Posted: Thu Apr 28, 2011 6:42 pm
by com501
If its an assignable channel, the BPR40 will handle it, especially with the newer units and the newest firmware. They are now shipping from the factory setup as narrowband by default.
Re: BPR40 available frequencies
Posted: Tue May 10, 2011 12:18 pm
by Karfield
Yes the devisible by 6.25 and 5.0 rule applies to UHF. This rule is basically for all low tier units up to the CP200. I made a little excel spreadsheet that does all the work for me that I handed to the sales people here so we don't make unprogrammable mistakes.