Code plug for a maxtrac ?

[Satelite]

Hello:
Anyone have a code plug for a Maxtrac D35MQAGB1_K ?
This would be a 800 mhz 15watt Privacy Plus mobile.
I have one throwing the error 53 corupted code plug due to a check sum error that id like to corect by cloning a good code plug then reprogram per needed for the customer.
[email protected]
Thank you
satelite

[Jim202]

Hello:
Anyone have a code plug for a Maxtrac D35MQAGB1_K ?
This would be a 800 mhz 15watt Privacy Plus mobile.
I have one throwing the error 53 corupted code plug due to a check sum error that id like to corect by cloning a good code plug then reprogram per needed for the customer.
[email protected]
Thank you
satelite

I believe that you should be able to read the radio, check to make sure you have good channel information and write the plug back to the radio.

I believe that there is some info on the batlabs.com site that may help you with the problem.

Jim

[Satelite]

Hello :
The radio will read but not all the way through the code plug .
It pops up the error 53 check sum for trunking #1 .
Maxtrac manual says corupted logic bd. needs replaced.
I have in the past blanked and reinitiated to get radio back up and running.
This would appear to be the situation again with the exception that with a trunked maxtrac the reinitiation requires a file as per the screen info when i attempted to reinitiate the now blanked radio.
Satelite