Batboard

Connection problems with a USB adapter serial <=> USB

I use a computer with windows7 (64bit) with no serial connection.
In order to program my Motorola GP3xx I use a ribless a serial cable.
For it to be usable with my PC configuration with only USB connections,
I use the a USB adapter. Serial <=> USB.
Necessary drivers (drv) are available and is functioning.

This cable is able to read my radio GP3XX using ComTool.exe.
and I can get all the information from the radio about prog. version, radio version, etc.

But I can not make any contact with the radio from the CPS:

GP300/GM300 Professional Series CPS ver. R03.11.15

This is strange because contact can be established with the help of ComTool.exe

Someone who can help with to solve this problem?

Did you tell CPS which COM PORT the adapter is attached to?

Marshall

No, under which meny can I do this?
ComTool.exe give my some information
but I cannot put this information in CPS.

I don't have access to that particular CPS but under XTS it's on under View/Main/Port Selection.

Marshall

commsbepx64 solved all the problems and now it works fine.

QRP wrote:commsbepx64 solved all the problems and now it works fine.

Can you tell us what this is, and how it helped? Google doesn't reveal much about it...

Latest CPS for Waris (EMEA) is ENVN4005Z CPS R03.11.16_EN (ENLN4115U 07.Jan.2012) makes it possible to use it with Win7 64bit without any problems with a USB adapter serial <=> USB. This program includes the drv (commsbepx64 ) that makes it possible.