Page 1 of 1
Fishy HT1000 label...
Posted: Sat Jun 11, 2011 1:43 pm
by bezking
I picked up this NOS-looking HT1000 R-split at a local hamfest a while back. It works great and programs fine. One of the things I noticed, however, is that there is a typo on the label... so did /\/\ actually make a mistake or is the label (and/or whole radio) a fake!?
Here's a picture (click for really big) - notice the last line of text on the bottom of the shot:

Re: Fishy HT1000 label...
Posted: Sat Jun 11, 2011 2:06 pm
by Tom in D.C.
Ben,
Perhaps it's yet another reflection of our failing educational systems. At the entrance to the Blue Ridge Parkway near my place in Virginia is a large sign (been there for years) from the US Park Service that says, "No Comerical Vehicles." There's no reason why Motorola should be immune to such mistakes.
Regards,
Re: Fishy HT1000 label...
Posted: Sat Jun 11, 2011 2:17 pm
by RadioSouth
Looks fake, no mention where made and label looks different. Are the rounded corners hacked a bit ?
Along the line of Tom's observation I had a sign reading 'YEILD' on my old beat, took them almost 2 mos. to correct after I put a work order in.
Re: Fishy HT1000 label...
Posted: Sat Jun 11, 2011 2:24 pm
by bezking
@Tom, I wouldn't be surprised. This country is going to hell in a handbasket...
@South, they are, but ever so slightly. The barcode label beneath the label is perfect, however...
Re: Fishy HT1000 label...
Posted: Sat Jun 11, 2011 2:45 pm
by RadioSouth
Looking again the FCC # box is not centered and a couple of lines below don't seem margined correctly either. All of mine also have a DOC# and a Type (with four letters afterwards) as well. (Yeah, I know but I'm stuck in the house while it's pouring out and primetime hasn't started yet).
Re: Fishy HT1000 label...
Posted: Sat Jun 11, 2011 2:56 pm
by bezking
Thanks. OK, so at least the tag is fake. It has a valid serial number though - and if I run it in the warranty verification tool on MOL it comes back with the production date (1998) so I'm hoping it's just the label...
Re: Fishy HT1000 label...
Posted: Sat Jun 11, 2011 3:23 pm
by MTS2000des
there were a ton of MTS2000 VHF radios on brokenstolenradios.com I mean Ebay, which had a white label and the model mis-spelled and in parenthesis. (MTS200 instead of MTS2000). They didn't look like the typical white tag, had a duller surface but were cut even, however the serial numbers matched what was inside as did the vintage of the controller and RF boards, so who knows where they came from.
Re: Fishy HT1000 label...
Posted: Sat Jun 11, 2011 3:44 pm
by N4KVE
Everyone missed the obvious. Look at the FCC approval #. It ends in 3768 which would be for a VHF Jedi, however the model # on the tag says RDC which is 403-470 UHF low split. What's up with that? GARY N4KVE
Re: Fishy HT1000 label...
Posted: Sat Jun 11, 2011 4:03 pm
by escomm
Fake sticker is fake
Re: Fishy HT1000 label...
Posted: Sat Jun 11, 2011 5:19 pm
by d119
Agreed, it's a forgery. It's possible that some shop out there re-cased the radio and made a "best effort" stab at the label to please their customers. When we re-case, if the label won't transfer we just stick a P-touch label on it and call it done - no point in trying to get fancy about it.
Re: Fishy HT1000 label...
Posted: Sat Jun 11, 2011 5:30 pm
by bezking
I feel like d119's explanation is probably it - especially considering how well the radio actually works and looks - according to Mot this radio was made in 98, and it's just too clean to even have been a desk queen from that long ago...
Re: Fishy HT1000 label...
Posted: Mon Jun 13, 2011 11:21 am
by com501
Forgery.
Even the radios from the Depot have labels that are printed there, but are correct...