MCS2000 INCORRECT CONTROL HEAD

This forum is for discussions regarding all aspects of Motorola radio programming, including hardware, computers, installation and use of RSS/CPS, firmware upgrades, and troubleshooting. There are subforums for discussions of codeplugs, and also for software/firmware release notes and issues.

Moderator: Queue Moderator

Post Reply
anautofix
Posts: 57
Joined: Fri Jan 06, 2006 11:09 am

MCS2000 INCORRECT CONTROL HEAD

Post by anautofix »

I have a model II UHF 110w unit. When I read the radio it gives me options for a model III control head and or mike only. How can I tell it it has a model II control head attached to it?? Is there a dip switch?? Any help is greatly appreciated. Please e-mail me at [email protected]

Thank You in advance!!
Top
Spiffy50
Posts: 173
Joined: Tue Feb 09, 2010 7:37 am

Re: MCS2000 INCORRECT CONTROL HEAD

Post by Spiffy50 »

You would need to blast in a codeplug from a Model 2 radio. I had the same thing happen on a 900MHz radio. When I got it, it read as a Model 2 but had a Model 3 head. It came from a shop that deals with used radios, so I wouldn't be surprised if someone put on the wrong head not realizing. The only way I was able to fix it was to blast in a new M3 codeplug.
Top
Post Reply

Return to “Radio Programming”