Page 1 of 1
XTS2500 UHF Fail 01/82
Posted: Mon Jun 13, 2011 7:12 pm
by b7spectra
Just got hold of an XTS2500 M3 450-512 portable that has a FAIL 01/82 on it. I'm using 05.03.00 and when either I try to read it or program in another code plug of the same model, I get "Hardware Failure in Port or Radio Error Context: 23, Status 80004005.
And ideas? I've got other 2500 of different splits and can read/write to them without problems.
Re: XTS2500 UHF Fail 01/82
Posted: Mon Jun 13, 2011 7:43 pm
by Batwings21
I bet it has firmware version 11.00.00 in it. This firmware is known for causing these issues.
Re: XTS2500 UHF Fail 01/82
Posted: Mon Jun 13, 2011 8:28 pm
by bezking
IF it has Firmware 11 and it is showing 01/82 you will have to depot it... You had better hope you have legit tags on that radio...
Also - R05 CPS is crazy old... the current version is R15!
Re: XTS2500 UHF Fail 01/82
Posted: Mon Jun 13, 2011 9:48 pm
by Mfire39
b7spectra wrote:I'm using 05.03.00 and when either I try to read it or program in another code plug of the same model, I get "Hardware Failure in Port or Radio Error Context: 23, Status 80004005.
There was no R05.03.00 Astro25 CPS. There was however R05.03.00 ASTRO CPS, which will not read your XTS2500, hence the error you are getting.
-Marc
Re: XTS2500 UHF Fail 01/82
Posted: Wed Jun 15, 2011 5:15 pm
by b7spectra
I am using R15.00.00 (I was looking at another codeplug when I typed the previous) and no joy. Lucky for me, I've got a Moto tech who is going to give it a whirl.