Analog Spectra PA/Sien AMP with ASTRO Spectra issue

[alex4659]

Hi all,

Ive just programmed my astro spectra for the Siren PA function and when i turn on the radio i get an error code like ?/08 and the pa functions are not working on the DEK.

Any way this is what i have:

Analog Spectra systems 9000 PA/Siren Amp
cable that came with the AMP
Astro spectra remote mount mid power
W9 Head
Astro spectra CPS R05.02.00

Do i have to change the Jumper / VIP functions around via CPS or what?

thanks,
Alex

[jmr061]

Part #s of the siren and siren cable would be helpful. Is it error 8/10 that your getting. If it is the radio isn't seeing the siren amp. Was it know to be working. I have had many 1185B sirens on Astros and never had a problem.

Jason

[alex4659]

The error code im getting is error 09/10 witch is the secure module.
I went out to my truck and turned on the radio and all the lights come all except for the DEK?

After the self check, i try to press one of the function on the dek like air horn or PA and nothing heppends; no tones no lights nothing...?

Maybe a connection issue?

The cable does not have a number on it as far as i can tell. as for the PA amp, its taped to the radio with some heavy duty double sided tape... and i can not see a number else where. But the trim is blue, NOT red like most of the other analog spectra amp's

[alex4659]

Was it know to be working.
Jason

Yes, it was working fine with my analog spectra Hi Power

[jmr061]

Did you activate the dek in the CPS and program the DEK buttons?

Jason

[alex4659]

All is 10 4 now did not plug in one of the dek cables

This thread can now be closed