Page 1 of 1

Astro Saber Service Mode - How to?

Posted: Mon Jun 20, 2011 1:09 pm
by AL7OC
No luck searching BBS for answer... I want to get a seller to do a readout of an Astro Saber to determine the ROS/DSP version and the flash code to determine what the radio is worth, but I am not familiar with the radio button functions.
Is there a sequence of button pushing to get the radio to read out that info similar to an XTS3000?

Thanks.

Pierre

Re: Astro Saber Service Mode - How to?

Posted: Mon Jun 20, 2011 1:27 pm
by bezking
It's one of the buttons under the PTT. I can't remember if it's the left or the right, so try pressing one 5 times in rapid succession, and if that doesn't work, press the other button.

HTH

Re: Astro Saber Service Mode - How to?

Posted: Mon Jun 20, 2011 2:07 pm
by N6LAU
bezking wrote:It's one of the buttons under the PTT. I can't remember if it's the left or the right, so try pressing one 5 times in rapid succession, and if that doesn't work, press the other button.

HTH

Should be the one with two raised dots (:).