Batboard

hello, years ago when i owned the older-style ht1000/mts2000 chargers, i mounted them on the wall to save space. however, it looks more complicated with the newer impres chargers. first off, how do i flip the displays in display model 6-unit chargers so the display is reading right-side-up? Is there a button somewhere? secondly, does anyone know the part number for the mounting bracket?

There is a very small pushbutton on the display board that inverts the image, but you have to go "inside"
the unit to access it.

The part number for the wall mount bracket is NLN7967A

You can use a pin to push the button to invert the displays through the small hole near the corner of the display.

great guys, thanks alot for the responses!

while i have you guys, do either of you know if the display mod can be done on the 4121BR (multi unit charger) non-display version like on the single unit one? if so, what version do the displays need to be flashed to match v3.4 charger?

Code3 wrote:The part number for the wall mount bracket is NLN7967A

You can use a pin to push the button to invert the displays through the small hole near the corner of the display.

I find that a paper clip works best for me.