Page 1 of 1

Help with cable diagram for an astro spectar consolette

Posted: Wed Jul 20, 2011 1:40 pm
by alex4659
hi all,

I'm having trouble with making a cable for my Astro Spectra Consolette and need help figuring out what the problem is:

Here is a link for i am attempting to make:
http://www.batlabs.com/astconscbl.html

my problem is when i try to read the radio it just says: Radio communication failed...?

Any comments or suggestions?



thanks,
Alex

..::EDIT::..

Posted: Wed Jul 20, 2011 6:20 pm
by alex4659
Disregard this post... as i figured out what was wrong shortly after posting this... i soldered one of the wires wrong.



thanks,
Alex

Re: Help with cable diagram for an astro spectar consolette

Posted: Wed Jul 20, 2011 7:02 pm
by d119
Er, I've never done that before... I always open the thing up and plug into the DB15F on the radio...

Re: Help with cable diagram for an astro spectar consolette

Posted: Thu Sep 08, 2011 11:53 pm
by randymince
Alex, are you using a DB9 serial connection direct to pc, or using a RIB ? There are certain locations where this cable would be handy if it was possible to connect direct to serial without the RIB.

Re: Help with cable diagram for an astro spectar consolette

Posted: Fri Sep 09, 2011 1:28 pm
by jmr061
It is through a RIB. Take a look at the link for the cable. One end states DB25 RIB.

Jason

Re: Help with cable diagram for an astro spectar consolette

Posted: Fri Sep 09, 2011 2:26 pm
by Will

This cable works for the Spectra Consolete as well as the Astro Spectra.
And yes it does require the Radio Interface Box, RIB.

You will also note that the cable provides voltage to run the /\/\ RIB.

Re: Help with cable diagram for an astro spectar consolette

Posted: Fri Sep 09, 2011 9:59 pm
by randymince
Randy Ran wrote:Alex, are you using a DB9 serial connection direct to pc, or using a RIB ? There are certain locations where this cable would be handy if it was possible to connect direct to serial without the RIB.

I know the cable pin out was used for a RIB, I was asking if it was possible to terminate to DB9 and connect directly to a PC.

Re: Help with cable diagram for an astro spectar consolette

Posted: Sun Sep 11, 2011 7:34 pm
by Will
Randy Ran wrote:
Randy Ran wrote:Alex, are you using a DB9 serial connection direct to pc, or using a RIB ? There are certain locations where this cable would be handy if it was possible to connect direct to serial without the RIB.

I know the cable pin out was used for a RIB, I was asking if it was possible to terminate to DB9 and connect directly to a PC.
NO, the levels of the signals are different. That is why you need the Radio Interface Box, AKA RIB, to convert the RS232 signals from/to the computer to TTL signal levels in and out of the radio.

Re: Help with cable diagram for an astro spectar consolette

Posted: Mon Sep 12, 2011 2:53 am
by randymince
cool, that's what i was looking for, thanks