Batboard

Hi group: I need some info, using the Akardam decoder on a flashcode from my XTL5000 I am getting "No valid options for this bit on selected platforms" coming up on 3 lines.
What does this mean? Does it have a bad flash? I have never seen this before. Thanks, Bill

D5 B2 and D5 B3?

Telling us the flash would be helpful.

Jason

Sorry it is 58D288-441EE0-7 the feilds are D6 B3, D5 B3, D2 B2 Thanks, Bill

H04 Tactical Conventional Rekey - Can't have that
G352 - User Defineable Soft ID - Can't have that
G440- ???? - Can't have that

So what does that mean? Is there or will there will there be a problem with this radio? Do i need to get this removed? Thanks, Bill

radios4bill wrote:So what does that mean? Is there or will there will there be a problem with this radio? Do i need to get this removed? Thanks, Bill

You won't notice any operational problems with it.. Where you'll run into the problem is if you ever try to do a legit firmware upgrade with CPS.. The CPS will see those options as not valid, and it will puke an error message at you before it even tries to do the upgrade..


-Marc

I seen a vaild 540008-061480 flash in XTL2500s direct from Motorola and I'm told that D5 B2 and D5 B3 are required for operation with a certain thrid party infrastructure provider.