Batboard

I've noticed that on every one of my FPP XTS2500s and XTS5000s (VHF, UHF, firmware 12.xx, 14.xx and 15.xx), it doesn't seem to be possible use FPP to program an analog-only channel for 12.5KHz spacing (only 20KHz or 25KHz). Mixed-mode allows 12.5KHz, however.

I can program analog-only 12.5KHz channels (2.5KHz deviation) with no problem via the Astro25 CPS (v14 and v15), but the 12.5KHz option isn't there when I use FPP.

Anyone know what's going on here? Is this a bug, did I misconfigure something in the codeplug, or am I missing something?

Thanks

Does the radio have hardware encryption? If you set the channel for analog only and select or secure, you will be forced to Securenet, which requires a 5KHz channel. Changing the channel to mixed-mode switches the crypto to ASTRO, which is fine with 2.5KHz.

Set the analog channels to Clear rather than Select/Secure and it should work.