programming the 960 radios

[proff]

I think it was the MTX960 radios,
I was given these radios and was asked to copy one radio and make the others the same so they could talk to each other.
I forgot how
I could read the target radio Ok , with the right software but couldn't clone to the other radios.
I couldn't change the serial number.
I couldn't enable the system keys.
what should i do?

[sglass]

My response is not meant to sound douchey, please don't take it as such.

I couldn't change the serial number.

you don't need to.

I couldn't enable the system keys.

You don't need a system key enabled for conventional use.

what should i do?

Write down the conventional frequencies and pl/dpl codes from the target radio. The read the other radios and put those conventional personalities in them.

[proff]

i want to program the trunk info too